Yayınlar

Üretim mühendisliği alanına araştırma katkıları

Optimum Laser Polishing Decision-Making for On-Demand Additive Manufacturing of Spare Parts: An Exploratory Study.

Journal Article

M. Hekimoğlu, D. Ulutan

Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi, Vol. 24.2, pp. 516-525, 2020

True Variable-Depth Milling.

Journal Article

D. Ulutan.

Procedia Manufacturing, Vol. 48, pp. 593-97, 2020

A Review of Assisted / Augmented Manufacturing Processes.

Conference Paper

C. Nguyen, M. Laminen, D. Ulutan.

ASME 2019 International Manufacturing Science and Engineering Conference (MSEC 2019), Erie, Pennsylvania, June 10-14, 2019

Hard Machining.

Book Chapter

D. Ulutan & T. Özel.

Modern Manufacturing Processes, 13, pp. 1118071921 ISBN-13: 978-1118071922, 2019

Increasing Tool Life in Metals via True Variable Depth Milling.

Poster

M. Laminen, D. Ulutan.

ASME 2019 International Manufacturing Science and Engineering Conference (MSEC 2019), Erie, Pennsylvania, June 10-14, 2019, 2019

Prediction of Mechanical Properties of Direct Metal Laser Sintered 15-5PH Steel Parts Using Bayesian Inference - A Preliminary Study.

Conference Paper

A. Qattawi, D. Ulutan, A. Alafaghani.

ASME 2019 International Manufacturing Science and Engineering Conference (MSEC 2019), Erie, Pennsylvania, June 10-14, 2019

Treating students like adults - can they manage their own grading scheme?

Conference Paper

D. Ulutan.

2019 ASEE Pacific South West Section Annual Conference and Exposition (ASEE PSW 2019), Los Angeles, California, April 4-6, 2019

Waste of time or learning experience? A quantitative and qualitative analysis on the effective use of office hours.

Conference Paper

D. Ulutan.

ASEE 126th Annual Conference & Exposition, Tampa, Florida, June 16-19, 2019

Development of laser polishing as an auxiliary post-process to improve surface quality in fused deposition modeling parts.

Conference Paper

M. Perez Dewey, D. Ulutan.

ASME 2017 International Manufacturing Science and Engineering Conference (MSEC 2017), Los Angeles, California, June 4-8, 2017

Precision 3D Printing – An Integrated Approach Using Stochastic Modeling, In-Situ Feedback Control, and Assisted / Hybrid Manufacturing.

Other

D. Ulutan.

San José State University, Department of Aviation and Technology, April 4, 2017, 2017

Precision Biomanufacturing & A Look toward 4D-Printing.

Other

D. Ulutan.

Drexel University, Department of Mechanical Engineering and Mechanics, February 28, 2017, 2017

A Wavelet Based Data-Driven Modeling for Tool Wear Assessment of Difficult to Machine Materials.

Journal Article

F. Akhavan Niaki, L. Feng, D. Ulutan, L. Mears.

International Journal of Mechatronics and Manufacturing Systems, Vol. 9.2, pp. 97-121, 2016

Parameter Inference Under Uncertainty in End-Milling γ’-Strengthened Difficult-to-Machine Alloy.

Journal Article

F. Akhavan Niaki, D. Ulutan, L. Mears.

Journal of Manufacturing Science and Engineering, Vol. 138.6, 2016

Taking Manufacturing to the Next Step.

Other

D. Ulutan.

Rutgers University, Department of Industrial & Systems Engineering, February 23, 2016, 2016

An Investigation of Alternative Path Planning Strategies for Machining of Nickel-Based Superalloys.

Journal Article

A. Pleta, D. Ulutan, L. Mears.

Procedia Manufacturing, Vol. 1, pp. 556-566, 2015

An Investigation of Alternative Path Planning Strategies for Machining of Nickel-Based Superalloys.

Conference Paper

A. Pleta, D. Ulutan, L. Mears.

43rd North American Manufacturing Research Conference (NAMRC), Charlotte, North Carolina, June 8-12, 2015

Characterization of Flow Drill Screwdriving Process Parameters on Joint Quality.

Journal Article

J. Skovron, L. Mears, D. Ulutan, D. Detwiler, D. Paolini, B. Baeumler, L. Claus.

SAE International Journal of Materials and Manufacturing, Vol. 8.1, 2015

Comparison and Cost Optimization of Solid Tool Life in End Milling Nickel-Based Superalloy.

Journal Article

D. Ulutan, A. Pleta, A. Henderson, L. Mears.

Procedia Manufacturing, Vol. 1, pp. 522-533, 2015

Comparison and Cost Optimization of Solid Tool Life in End Milling Nickel-Based Superalloy.

Conference Paper

D. Ulutan, A. Pleta, A. Henderson, L. Mears.

43rd North American Manufacturing Research Conference (NAMRC), Charlotte, North Carolina, June 8-12, 2015

Effect of Thermal Assistance on the Joining of Al6063 during Flow Drill Screwdriving.

Conference Paper

J. Skovron, D. Ulutan, L. Mears, D. Detwiler, D. Paolini, B. Baemler, L. Claus.

ASME 2015 International Manufacturing Science and Engineering Conference (MSEC 2015), Charlotte, North Carolina, June 8-12, 2015

Effect of Thermal Assistance on the Joint Quality of Al6063-T5A During Flow Drill Screwdriving.

Journal Article

J. Skovron, R. Prasad, D. Ulutan, L. Mears, D. Detwiler, D. Paolini, B. Baeumler, L. Claus.

Journal of Manufacturing Science and Engineering, Vol. 137.5, 2015

Effect of Torque Holding Time on Sheet Separation in Flow Drill Screwing.

Poster

R. Prasad, J. Skovron, L. Mears, D. Ulutan, D. Detwiler, B. Baemler, L. Claus.

ASME 2015 International Manufacturing Science and Engineering Conference (MSEC 2015), Charlotte, North Carolina, June 8-12, 2015, 2015

Electrically Assisted Augmentation of the Forming Process.

Poster

H. Date, A. Pleta, L. Mears, D. Ulutan.

ASME 2015 International Manufacturing Science and Engineering Conference (MSEC 2015), Charlotte, North Carolina, June 8-12, 2015, 2015

Electrically-Assisted Machining of Titanium Alloy Ti-6Al-4V and Nickel-Based Alloy IN-738: An Investigation.

Conference Paper

D. Ulutan, A. Pleta, L. Mears.

ASME 2015 International Manufacturing Science and Engineering Conference (MSEC 2015), Charlotte, North Carolina, June 8-12, 2015

Energy Consumption Modeling and Analysis in Automotive Manufacturing Final Assembly Process.

Conference Paper

L. Feng, D. Ulutan, L. Mears.

3rd Annual IEEE Conference on Technologies for Sustainability (SusTech), Ogden, Utah, July 30-August 1, 2015

In-Process Tool Flank Wear Estimation in Machining Gamma-Prime Strengthened Alloys Using Kalman Filter.

Journal Article

F. Akhavan Niaki, D. Ulutan, L Mears.

Procedia Manufacturing, Vol. 1, pp. 696-707, 2015

In-Process Tool Flank Wear Estimation in Machining Gamma-Prime Strengthened Alloys Using Kalman Filter.

Conference Paper

F. Akhavan Niaki, D. Ulutan, L. Mears.

43rd North American Manufacturing Research Conference (NAMRC), Charlotte, North Carolina, June 8-12, 2015

Parameter Estimation in Mechanistic Tool Wear Model: A Bayesian Approach.

Conference Paper

F. Akhavan Niaki, D. Ulutan, L. Mears.

2015 TMS Annual Meeting & Exhibition, Orlando, Florida, March 15-19, 2015

Parameter Estimation using Markov Chain Monte Carlo Method in Mechanistic Modeling of Tool Wear during Milling.

Conference Paper

F. Akhavan Niaki, D. Ulutan, L. Mears.

ASME 2015 International Manufacturing Science and Engineering Conference (MSEC 2015), Charlotte, North Carolina, June 8-12, 2015

Stochastic Tool Wear Assessment in Milling Difficult to Machine Alloys.

Journal Article

F. Akhavan-Niaki, D. Ulutan, L. Mears.

International Journal of Mechatronics and Manufacturing Systems, Vol. 8.3/4, pp. 134-159, 2015

Tool Wear Prediction through Vibration Data during End-Milling of Nickel-Based Superalloys.

Conference Paper

V. Bardis, F. Akhavan Niaki, D. Ulutan, L. Mears.

ASME 2015 International Manufacturing Science and Engineering Conference (MSEC 2015), Charlotte, North Carolina, June 8-12, 2015

Wavelet Based Sensor Fusion for Tool Condition Monitoring of Hard to Machine Materials.

Conference Paper

F. Akhavan Niaki, D. Ulutan, L. Mears.

2015 IEEE International Conference on Multisensor Fusion and Integration for Intelligent Systems, San Diego, California, September 14-16, 2015

Characterization of Flow Drill Screwing Process Parameters on Joint Quality.

Conference Paper

J. Skovron, L. Mears, D. Ulutan, D. Detwiler, B. Baemler, L. Claus.

SAE 2014 Aerospace Manufacturing and Automated Fastening Conference & Exhibition, Salt Lake City, Utah, September 23-25, 2014

Characterization of Flow Drill Screwing Process Parameters on Joint Quality.

Poster

J. Skovron, L. Mears, D. Ulutan, D. Detwiler, B. Baemler, L. Claus.

ASME 2014 International Manufacturing Science and Engineering Conference (MSEC 2014), Detroit, Michigan, June 9-13, 2014, 2014

Effect of Machining Parameters and Tool Geometry on Serrated Chip Formation, Specific Forces and Energies in Orthogonal Cutting of Nickel-Based Super Alloy Inconel 100.

Journal Article

T. Özel, D. Ulutan.

Journal of Engineering Manufacture, Vol. 228.7, pp. 673-686, 2014

Empirical Modeling of Residual Stress Profile in Machining Nickel-Based Superalloys Using the Sinusoidal Decay Function.

Journal Article

D. Ulutan, Y.M. Arisoy, T. Özel, L. Mears.

Procedia CIRP, Vol. 13, pp. 365-370, 2014

Empirical Modeling of Residual Stress Profile in Machining Nickel-Based Superalloys Using the Sinusoidal Decay Function.

Conference Paper

D. Ulutan, Y.M. Arisoy, T. Özel, L. Mears.

2nd CIRP Conference on Surface Integrity (CIRP-CSI), Nottingham, UK, May 28-30, 2014

Insert Comparison in High-Speed Cutting of Titanium Alloy Ti-6Al-4V and Nickel-Based Alloy IN-738.

Conference Paper

D. Ulutan, H. Potluri, A. Pleta, L. Mears.

3rd International Conference on Virtual Machining Process Technology (VMPT), Calgary, Alberta, Canada, May 20-23, 2014

Investigation of Trochoidal Milling in Nickel-Based Superalloy Inconel 738 and Comparison with End Milling.

Conference Paper

A. Pleta, D. Ulutan, L. Mears.

ASME 2014 International Manufacturing Science and Engineering Conference (MSEC 2014), Detroit, Michigan, June 9-13, 2014

Multi-Objective Particle Swarm Optimization of Machining Parameters for End Milling Titanium Alloy Ti-6Al-4V.

Conference Paper

D. Ulutan, A. Pleta, L. Mears.

ASME 2014 International Manufacturing Science and Engineering Conference (MSEC 2014), Detroit, Michigan, June 9-13, 2014

On the Machining Induced Residual Stresses in IN718 Nickel-Based Alloy: Experiments and Predictions with Finite Element Simulation.

Journal Article

A. Kortabarria, A. Madariaga, E. Fernandez, J.A. Esnaola, P.J. Arrazola, C. Cappellini, D. Ulutan, T. Özel.

Simulation Modelling Practice and Theory, Vol. 41, pp. 87-103, 2014

Prediction of Tool Wear Based on Cutting Forces When End Milling Titanium Alloy Ti-6Al-4V.

Conference Paper

C. Stanley, D. Ulutan, L. Mears.

ASME 2014 International Manufacturing Science and Engineering Conference (MSEC 2014), Detroit, Michigan, June 9-13, 2014

Determination of Constitutive Material Model Parameters in FE-Based Machining Simulations of Ti-6Al-4V and IN-100 Alloys: An Inverse Methodology.

Conference Paper

D. Ulutan, T. Özel.

41st North American Manufacturing Research Conference (NAMRC), Madison, Wisconsin, June 10-14, 2013

Determination of Tool Friction in Presence of Flank Wear and Stress Distribution Based Validation using Finite Element Simulations in Machining of Titanium and Nickel Based Alloys.

Journal Article

D. Ulutan, T. Özel.

Journal of Materials Processing Technology, Vol. 213.12, pp. 2217-2237, 2013

Multi-objective Optimization of Experimental and Simulated Residual Stresses in Turning of Nickel-alloy IN100.

Journal Article

D. Ulutan, T. Özel.

Materials and Manufacturing Processes, Vol. 28.7, pp. 835-841, 2013

Prediction of Machining Induced Microhardness using Finite Element Simulations and Machine Learning in Titanium Alloys.

Conference Paper

T. Özel, Y.M. Arisoy, D. Ulutan.

7th International Conference and Exhibition on Design and Production of Machines and Dies/Molds, Antalya, Turkey, June 20-23, 2013

A Methodology to Determine Friction in Orthogonal Cutting with Application to Machining Titanium and Nickel Based Alloys.

Conference Paper

D. Ulutan, T. Özel.

2012 ASME International Conference on Manufacturing Science and Engineering (MSEC 2012), South Bend, Indiana, June 4-8, 2012

Prediction of Machining Induced Residual Stresses in Turning of Titanium and Nickel Based Alloys with Experiments and Finite Element Simulations.

Journal Article

T. Özel, D. Ulutan.

CIRP Annals - Manufacturing Technology, Vol. 61.2, pp. 547-550, 2012

Predictive Modeling and Optimization of Machining Induced Surface Integrity with Applications in Titanium and Nickel-Based Alloyed End Products.

Poster

T. Özel, D. Ulutan.

2012 NSF CMMI Engineering Research and Innovation Conference, Boston, Massachusetts, July 9-12, 2012, 2012

Collaborative Research: Improving Machinability of Titanium Alloys using Physics-Based Simulation Modeling.

Poster

T. Özel, M. Sima, D. Ulutan, A.K. Srivastava.

2011 NSF CMMI Engineering Research and Innovation Conference, Atlanta, Georgia, January 4-7, 2011, 2011

Effects of Tool Micro-Geometry and Coatings in Turning of Ti-6Al-4V Titanium Alloy.

Conference Paper

M. Sima, D. Ulutan, T. Özel.

39th North American Manufacturing Research Conference (NAMRC), Corvallis, Oregon, June 13-17, 2011

Experiments and Finite Element Simulations on Micro-Milling of Ti-6Al-4V Alloy with Uncoated and cBN Coated Micro-Tools.

Journal Article

T. Özel, T. Thepsonthi, D. Ulutan, B. Kaftanoğlu.

CIRP Annals - Manufacturing Technology, Vol. 60, pp. 85-88, 2011

Machining Induced Surface Integrity in Titanium and Nickel Alloys: A Review.

Journal Article

D. Ulutan, T. Özel.

International Journal of Machine Tools and Manufacture, Vol. 51.3, pp. 250-280, 2011

Micro-Milling of Ti-6Al-4V Alloy with Uncoated and cBN Coated Micro-Tools.

Conference Paper

T. Özel, T. Thepsonthi, D. Ulutan, B. Kaftanoğlu.

6th International Conference and Exhibition on Design and Production of Machines and Dies/Molds, Ankara, Turkey, June 23-26, 2011

Prediction of Machining Induced Surface Integrity using Elastic-Viscoplastic Simulations and Temperature-Dependent Flow Softening Material Models in Titanium and Nickel-Based Alloys.

Journal Article

D. Ulutan, M. Sima, T. Özel.

Advanced Materials Research, Vol. 223, pp. 401-410, 2011

Prediction of Machining Induced Surface Integrity using Elastic-Viscoplastic Simulations and Temperature-Dependent Flow Softening Material Models in Titanium and Nickel-based alloys.

Conference Paper

D. Ulutan, M. Sima, T. Özel.

13th CIRP International Workshop on Modeling of Machining Operations (MMO), Sintra, Portugal, May 12-13, 2011

Three-Dimensional Temperature Prediction in Machining Processes Using Finite Difference Method.

Journal Article

D. Ulutan, I. Lazoğlu, C. Dinç.

Journal of Materials Processing Technology, Vol. 209, pp. 1111-1121, 2009

3D Temperature Fields in Machining.

Conference Paper

I. Lazoğlu, D. Ulutan, C. Dinç.

3rd CIRP International HPC Conference, Dublin, Ireland, June 2008

An Enhanced Analytical Model for Residual Stress Prediction in Machining.

Journal Article

I. Lazoğlu, D. Ulutan, B. E. Alaca, S. Engin.

CIRP Annals - Manufacturing Technology, Vol. 57.1, pp. 81-84, 2008

An Enhanced Analytical Model for Residual Stress Prediction in Machining.

Conference Paper

I. Lazoğlu, D. Ulutan, B.E. Alaca, S. Engin.

58th CIRP General Assembly, Manchester, England, August 2008

Analytical Modeling of Residual Stresses in Machining.

Journal Article

D. Ulutan, B. Erdem Alaca, I. Lazoğlu.

Journal of Materials Processing Technology, Vol. 183, pp. 77-87, 2007