Publications - Durul Ulutan

Theoretical modeling of intertwined tool flank wear and cutting forces in machining nickel-based alloys

Conference Paper

D. Ulutan

Scientific Books of Abstracts, 3, pp. 34

Optimum utilization of on-demand manufacturing and laser polishing in existence of supply disruption risk

Journal Article

D. Ulutan, Z. İşler, B.E. Kaya, M. Hekimoğlu

Manufacturing Letters, Vol. 33, pp. 17-28, 2022

Optimum laser polishing decision-making for On-Demand Additive Manufacturing of spare parts: An exploratory study

Journal Article

M. Hekimoğlu, D. Ulutan

Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi, Vol. 24 (2), pp. 516-525, 2020

Download PDF

True variable-depth milling of nickel-based alloy IN-718

Journal Article

D. Ulutan

Çukurova Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi, Vol. 35 (3), pp. 583-592, 2020

Download PDF

A Review of Assisted/Augmented Manufacturing Processes

Conference Paper

C. Nguyen, M. Laminen, D. Ulutan

ASME International Manufacturing Science and Engineering Conference, 2019

Download PDF

Machining Titanium Alloys: Modeling, Simulation, and Industrial Application

Book Chapter

M. Koç, T. Özel (eds.), D. Ulutan (chapter author)

John Wiley & Sons, pp. 309-321, 2019

Download PDF

Prediction of mechanical properties of direct metal laser sintered 15-5PH steel parts using Bayesian inference: A preliminary study

Conference Paper

A. Qattawi, D. Ulutan, A. Alafaghani

ASME International Manufacturing Science and Engineering Conference, 2019

Download PDF

Development of laser polishing as an auxiliary post-process to improve surface quality in fused deposition modeling parts

Conference Paper

M. Perez Dewey, D. Ulutan

ASME International Manufacturing Science and Engineering Conference, 2017

Download PDF

A wavelet-based data-driven modelling for tool wear assessment of difficult to machine materials

Journal Article

F.A. Niaki, L. Feng, D. Ulutan, L. Mears

International Journal of Mechatronics and Manufacturing Systems, Vol. 9 (2), pp. 97-121, 2016

Download PDF

Parameter inference under uncertainty in end-milling γ′-strengthened difficult-to-machine alloy

Journal Article

F. Akhavan Niaki, D. Ulutan, L. Mears

Journal of Manufacturing Science and Engineering, Vol. 138 (6), pp. 061014, 2016

Download PDF

An Investigation of Alternative Path Planning Strategies for Machining of Nickel-Based Superalloys.

Conference Paper

A. Pleta, D. Ulutan, L. Mears.

43rd North American Manufacturing Research Conference (NAMRC), Charlotte, North Carolina, June 8-12, 2015

Download PDF

Comparison and Cost Optimization of Solid Tool Life in End Milling Nickel-Based Superalloy.

Conference Paper

D. Ulutan, A. Pleta, A. Henderson, L. Mears.

43rd North American Manufacturing Research Conference (NAMRC), Charlotte, North Carolina, June 8-12, 2015

Download PDF

Effect of Thermal Assistance on the Joining of Al6063 during Flow Drill Screwdriving.

Conference Paper

J. Skovron, D. Ulutan, L. Mears, D. Detwiler, D. Paolini, B. Baemler, L. Claus.

ASME 2015 International Manufacturing Science and Engineering Conference (MSEC 2015), Charlotte, North Carolina, June 8-12, 2015

Download PDF

Effect of thermal assistance on the joint quality of Al6063-T5A during flow drill screwdriving

Journal Article

J.D. Skovron, R. Rohan Prasad, D. Ulutan, L. Mears, D. Detwiler, D. Paolini, B. Baeumler, L. Claus

Journal of Manufacturing Science and Engineering, Vol. 137 (5), pp. 051019, 2015

Download PDF

Effect of Torque Holding Time on Sheet Separation in Flow Drill Screwing.

Poster

R. Prasad, J. Skovron, L. Mears, D. Ulutan, D. Detwiler, B. Baemler, L. Claus.

ASME 2015 International Manufacturing Science and Engineering Conference (MSEC 2015), Charlotte, North Carolina, June 8-12, 2015, 2015

Electrically Assisted Augmentation of the Forming Process.

Poster

H. Date, A. Pleta, L. Mears, D. Ulutan.

ASME 2015 International Manufacturing Science and Engineering Conference (MSEC 2015), Charlotte, North Carolina, June 8-12, 2015, 2015

Electrically-Assisted Machining of Titanium Alloy Ti-6Al-4V and Nickel-Based Alloy IN-738: An Investigation.

Conference Paper

D. Ulutan, A. Pleta, L. Mears.

ASME 2015 International Manufacturing Science and Engineering Conference (MSEC 2015), Charlotte, North Carolina, June 8-12, 2015

Download PDF

Energy Consumption Modeling and Analysis in Automotive Manufacturing Final Assembly Process.

Conference Paper

L. Feng, D. Ulutan, L. Mears.

3rd Annual IEEE Conference on Technologies for Sustainability (SusTech), Ogden, Utah, July 30-August 1, 2015

Download PDF

In-process tool flank wear estimation in machining gamma-prime strengthened alloys using kalman filter

Journal Article

F.A. Niaki, D. Ulutan, L. Mears

Procedia Manufacturing, Vol. 1, pp. 696-707, 2015

Download PDF

Parameter Estimation in Mechanistic Tool Wear Model: A Bayesian Approach.

Conference Paper

F. Akhavan Niaki, D. Ulutan, L. Mears.

2015 TMS Annual Meeting & Exhibition, Orlando, Florida, March 15-19, 2015

Download PDF

Parameter Estimation using Markov Chain Monte Carlo Method in Mechanistic Modeling of Tool Wear during Milling.

Conference Paper

F. Akhavan Niaki, D. Ulutan, L. Mears.

ASME 2015 International Manufacturing Science and Engineering Conference (MSEC 2015), Charlotte, North Carolina, June 8-12, 2015

Download PDF

Stochastic tool wear assessment in milling difficult to machine alloys

Journal Article

F.A. Niaki, D. Ulutan, L. Mears

International Journal of Mechatronics and Manufacturing Systems, Vol. 8 (3-4), pp. 134-159, 2015

Download PDF

Tool Wear Prediction through Vibration Data during End-Milling of Nickel-Based Superalloys.

Conference Paper

V. Bardis, F. Akhavan Niaki, D. Ulutan, L. Mears.

ASME 2015 International Manufacturing Science and Engineering Conference (MSEC 2015), Charlotte, North Carolina, June 8-12, 2015

Download PDF

Wavelet Based Sensor Fusion for Tool Condition Monitoring of Hard to Machine Materials.

Conference Paper

F. Akhavan Niaki, D. Ulutan, L. Mears.

2015 IEEE International Conference on Multisensor Fusion and Integration for Intelligent Systems, San Diego, California, September 14-16, 2015

Download PDF

Characterization of Flow Drill Screwing Process Parameters on Joint Quality.

Conference Paper

J. Skovron, L. Mears, D. Ulutan, D. Detwiler, B. Baemler, L. Claus.

SAE 2014 Aerospace Manufacturing and Automated Fastening Conference & Exhibition, Salt Lake City, Utah, September 23-25, 2014

Empirical Modeling of Residual Stress Profile in Machining Nickel-Based Superalloys Using the Sinusoidal Decay Function.

Conference Paper

D. Ulutan, Y.M. Arisoy, T. Özel, L. Mears.

2nd CIRP Conference on Surface Integrity (CIRP-CSI), Nottingham, UK, May 28-30, 2014

Download PDF

Insert Comparison in High-Speed Cutting of Titanium Alloy Ti-6Al-4V and Nickel-Based Alloy IN-738.

Conference Paper

D. Ulutan, H. Potluri, A. Pleta, L. Mears.

3rd International Conference on Virtual Machining Process Technology (VMPT), Calgary, Alberta, Canada, May 20-23, 2014

Download PDF

Investigation of Trochoidal Milling in Nickel-Based Superalloy Inconel 738 and Comparison with End Milling.

Conference Paper

A. Pleta, D. Ulutan, L. Mears.

ASME 2014 International Manufacturing Science and Engineering Conference (MSEC 2014), Detroit, Michigan, June 9-13, 2014

Multi-Objective Particle Swarm Optimization of Machining Parameters for End Milling Titanium Alloy Ti-6Al-4V.

Conference Paper

D. Ulutan, A. Pleta, L. Mears.

ASME 2014 International Manufacturing Science and Engineering Conference (MSEC 2014), Detroit, Michigan, June 9-13, 2014

Download PDF

On the machining induced residual stresses in IN718 nickel-based alloy: Experiments and predictions with finite element simulation

Journal Article

P.J. Arrazola, A. Kortabarria, A. Madariaga, J.A. Esnaola, E. Fernandez, D. Ulutan, T. Özel

Simulation Modelling Practice and Theory, Vol. 41, pp. 87-103, 2014

Download PDF

Prediction of Tool Wear Based on Cutting Forces When End Milling Titanium Alloy Ti-6Al-4V.

Conference Paper

C. Stanley, D. Ulutan, L. Mears.

ASME 2014 International Manufacturing Science and Engineering Conference (MSEC 2014), Detroit, Michigan, June 9-13, 2014

Download PDF

Determination of Constitutive Material Model Parameters in FE-Based Machining Simulations of Ti-6Al-4V and IN-100 Alloys: An Inverse Methodology.

Conference Paper

D. Ulutan, T. Özel.

41st North American Manufacturing Research Conference (NAMRC), Madison, Wisconsin, June 10-14, 2013

Download PDF

Determination of tool friction in presence of flank wear and stress distribution based validation using finite element simulations in machining of titanium and nickel based alloys

Journal Article

D. Ulutan, T. Özel

Journal of Materials Processing Technology, Vol. 213 (12), pp. 2217-2237, 2013

Download PDF

Multiobjective optimization of experimental and simulated residual stresses in turning of nickel-alloy IN100

Journal Article

D. Ulutan, T. Özel

Materials and Manufacturing Processes, Vol. 28 (7), pp. 835-841, 2013

Download PDF

Prediction of Machining Induced Microhardness using Finite Element Simulations and Machine Learning in Titanium Alloys.

Conference Paper

Y.M. Arisoy, D. Ulutan, T. Özel.

7th International Conference and Exhibition on Design and Production of Machines and Dies/Molds, Antalya, Turkey, June 20-23, 2013

Download PDF

A Methodology to Determine Friction in Orthogonal Cutting with Application to Machining Titanium and Nickel Based Alloys.

Conference Paper

D. Ulutan, T. Özel.

2012 ASME International Conference on Manufacturing Science and Engineering (MSEC 2012), South Bend, Indiana, June 4-8, 2012

Download PDF

Prediction of machining induced residual stresses in turning of titanium and nickel based alloys with experiments and finite element simulations

Journal Article

T. Özel, D. Ulutan

CIRP Annals, Vol. 61 (1), pp. 547-550, 2012

Download PDF

Predictive Modeling and Optimization of Machining Induced Surface Integrity with Applications in Titanium and Nickel-Based Alloyed End Products.

Poster

T. Özel, D. Ulutan.

2012 NSF CMMI Engineering Research and Innovation Conference, Boston, Massachusetts, July 9-12, 2012, 2012

Collaborative Research: Improving Machinability of Titanium Alloys using Physics-Based Simulation Modeling.

Poster

T. Özel, M. Sima, D. Ulutan, A.K. Srivastava.

2011 NSF CMMI Engineering Research and Innovation Conference, Atlanta, Georgia, January 4-7, 2011, 2011

Effects of Tool Micro-Geometry and Coatings in Turning of Ti-6Al-4V Titanium Alloy.

Conference Paper

M. Sima, D. Ulutan, T. Özel.

39th North American Manufacturing Research Conference (NAMRC), Corvallis, Oregon, June 13-17, 2011

Experiments and finite element simulations on micro-milling of Ti–6Al–4V alloy with uncoated and cBN coated micro-tools

Journal Article

T. Özel, T. Thepsonthi, D. Ulutan, B. Kaftanoğlu

CIRP Annals, Vol. 60 (1), pp. 85-88, 2011

Download PDF

Machining induced surface integrity in titanium and nickel alloys: A review

Journal Article

D. Ulutan, T. Özel

International Journal of Machine Tools and Manufacture, Vol. 51 (3), pp. 250-280, 2011

Download PDF

Prediction of Machining Induced Surface Integrity using Elastic-Viscoplastic Simulations and Temperature-Dependent Flow Softening Material Models in Titanium and Nickel-based alloys.

Conference Paper

D. Ulutan, M. Sima, T. Özel.

13th CIRP International Workshop on Modeling of Machining Operations (MMO), Sintra, Portugal, May 12-13, 2011

Download PDF

Three-dimensional temperature predictions in machining processes using finite difference method

Journal Article

D. Ulutan, I. Lazoğlu, C. Dinç

Journal of Materials Processing Technology, Vol. 209 (2), pp. 1111-1121, 2009

Download PDF

3D Temperature Fields in Machining.

Conference Paper

I. Lazoğlu, D. Ulutan, C. Dinç.

3rd CIRP International HPC Conference, Dublin, Ireland, June 2008

An enhanced analytical model for residual stress prediction in machining

Journal Article

I. Lazoğlu, D. Ulutan, B.E. Alaca, S. Engin, B. Kaftanoğlu

CIRP Annals, Vol. 57 (1), pp. 81-84, 2008

Download PDF

Analytical modelling of residual stresses in machining

Journal Article

D. Ulutan, B.E. Alaca, I. Lazoğlu

Journal of Materials Processing Technology, Vol. 183 (1), pp. 77-87, 2007

Download PDF